Put a dot of tacky glue or hot glue at the top of the neck of the bottle, just under the rim, on the rear of the bottle. Put one end of the twine in the glue. Continue to wrap the twine tightly around the neck in a spiral. Secure the tail end of the twine with another dot of glue.
Download the Luck of the Irish SVG by filling out the form in this blog post. Then upload the SVG into the Cricut Design Space software.
Put the adhesive vinyl onto the green (medium grip) Cricut mat.
Follow the on-screen directions to cut out the design.
Use the Cricut weeding tool to remove the vinyl that is not part of the design.
Remove the backing from the transfer. Smooth it onto the design. Cut apart the design so that "Luck" "of the" and "Irish" are in 3 separate pieces, one for each bottle.
Flip over the designs. Remove the backing from the vinyl, so that it is now only stuck to the transfer tape.
Place a design onto the bottle, and press down firmly on the application tape to secure it. Then peel off the application tape in a diagonal direction. Repeat with the other two designs.
Add floral sprays if desired.